Hyundai Santa Fe: Body Electrical System / Auto Head Lamp Leveling Device
Inspection
Check if the auto light control operates like a timing chart shown below. Tail
lamp output and head lamp (Low) output is controlled based on the auto light
sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function
Switch is turned ON, and the vehicle is in IGN1 or IGN2 ON Mode...
Other information:
Removal
1.
Make sure vehicle does not roll before setting shift lever to "N" position.
2.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
3...
Temperature control
The temperature will increase by turning the knob to the right. The temperature
will decrease by turning the knob to the left.
Air intake control
This is used to select outside (fresh) air position or recirculated air position.
To change the air intake control position, press the control button...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more