| Circuit Diagram |



Specification Item Specification Coil Resistance (Ω) 6.0 - 7.0 [20°C (68°F)]
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the OCV connector. 3.
Smart Key Smart Key Code Saving 1. Connect the DLC cable of diagnostic tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on diagnostic tool. 2.
Troubleshooting Troubleshooting Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) blown Check for short and replace fuse Speedometer faulty Check speedometer CAN line faulty