Hyundai Santa Fe: LCD Display / Trip computer (Type B)

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual / LCD Display / Trip computer (Type B)

The trip computer is a microcomputercontrolled driver information system that displays information related to driving.

Information

Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected.

Trip modes

To change the trip mode, toggle the "˅, ˄" switch on the steering wheel

  • Manual reset
    To clear the average fuel economy manually, press the OK switch on the steering wheel for more than 1 second when the Average Fuel Economy is displayed.
  • Automatic reset
    To automatically reset the average fuel economy, select between ‘After Ignition’ or ‘After Refueling’ from the Settings menu in the instrument cluster.
    - After Ignition: When the engine has been OFF for 3 minutes or longer the average fuel economy will reset automatically.
    - After Refueling: The average fuel economy will reset automatically after adding 6 liters (1.6 gallons) of fuel or more and after driving speed exceeds 1 mph (1 km/h).

    Trip computer (Type A)

    The trip computer is a microcomputercontrolled driver information system that displays information related to driving. Information Some driving information stored in the trip computer (for example Average Vehicle Speed) resets if the battery is disconnected...

    Convenience features

    ..

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Inside rearview mirror


    Before driving your vehicle, check to see that your inside rearview mirror is properly positioned. Adjust the rearview mirror so that the view through the rear window is properly centered. WARNING Make sure your line of sight is not obstructed. Do not place objects in the rear seat, cargo area, or behind the rear headrests which could interfere with your vision through the rear window...

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Pressure Sensor. Repair procedures


    Inspection Measure the resistance of pressure sensor 1. Turn ignition switch OFF. 2. Disconnect the pressure sensor connector. 3. Measure resistance between sensor terminal and terminal...

    Categories

    Armrest

    The armrest is located in the center of the rear seat. Pull the armrest down from the seatback to use it.

    read more


     
    Copyright © 2025 www.hsafe4.com