Hyundai Santa Fe (TM): Parking Safety / System operation
Operating button
Parking Safety button

- Press the Parking Safety (
)
button to turn on Forward/Reverse Parking Distance Warning. Press the button
again to turn off the system.
- When Forward/Reverse Parking Distance Warning is off (button indicator
light off), if you shift the gear to R (Reverse), the system will automatically
turn on.
- When Forward/Reverse Parking Distance Warning turns on, the button indicator
light will turn on. If vehicle speed is above 12 mph (20 km/h), Forward/Reverse
Parking Distance Warning will turn off (button indicator light off).
* If equipped with Reverse Parking Collision-Avoidance Assist or Remote Smart
Parking Assist, Forward/Reverse Parking Distance Warning will turn off (button
indicator light off) when vehicle speed is above 18 mph (30 km/h).
Forward Parking Distance Warning
- Forward Parking Distance Warning will operate when one of the condition
is satisfied. -- The gear is shifted from R (Reverse) to D (Drive) with Reverse
Parking Distance Warning on -- The gear is in D (Drive) and the Parking Safety
button indicator light is on -- ‘Parking Distance Warning Auto On’ is selected
from the Settings menu and the gear is in D (Drive)
- Forward Parking Distance Warning detects a person, animal or object in
front when the vehicle’s forward speed is below 6 mph (10 km/h).
- Forward Parking Distance Warning does not operate when the vehicle's forward
speed is above 6 mph (10 km/h) even when the Parking Safety button indicator
is on. Forward Parking Distance Warning will operate again when the vehicle's
forward speed decreases below 6 mph (10 km/h) while the Parking Safety button
indicator is on.
- When ‘Parking Distance Warning Auto On’ is selected, the Parking Safety
button indicator light stays on.
- When ‘Parking Distance Warning Auto On’ is deselected, and the vehicle’s
forward speed is above 12 mph (20 km/h), the Parking Safety button indicator
will turn off. Although you drive below 6 mph (10 km/h), the system will not
turn on.
* If equipped with Reverse Parking Collision-Avoidance Assist or Remote Smart
Parking Assist, Forward/Reverse Parking Distance Warning will turn off when
vehicle speed is above 18 mph (30 km/h).

- The corresponding indicator will illuminate whenever each ultrasonic senor
detects a person, animal or object in its sensing range. Also an audible warning
will sound.
- When more than two objects are detected at the same time, the closest
one will be warned with an audible warning.
- The shape of the indicator in the illustration may differ from the actual
vehicle.
Reverse Parking Distance Warning
- Reverse Parking Distance Warning will operate when the gear is in R (Reverse).
- Reverse Parking Distance Warning detects a person, animal or object in
the rear when the vehicle’s rearward speed is below 6 mph (10 km/h).
- When the vehicle’s rearward speed is below 6 mph (10 km/h), both the front
and rear ultrasonic sensors will detect objects. However, the front ultrasonic
sensors can detect a person, animal or object when it is within 24 in. (60 cm)
from the sensors.

- The corresponding indicator will illuminate whenever each ultrasonic senor
detects a person, animal or object in its sensing range. Also an audible warning
will sound.
- When more than two objects are detected at the same time, the closest
one will be warned with an audible warning.
- The shape of the indicator in the illustration may differ from the actual
vehicle.
Forward/Reverse Parking Distance Warning will help warn the driver if an obstacle
is detected within a certain distance when the vehicle is moving forward or in reverse
at low speeds.
System malfunction
After starting the engine, a beep will sound when the gear is shifted to R (Reverse)
to indicate the system is operating normally.
However, if one or more of the following occurs, first check whether the ultrasonic
sensor is damaged or blocked with foreign material.
Other information:
Inspection
Self Diagnosis With Scan Tool
It will be able to diagnose defects of SMART KEY system with diagnostic tool
quickly. diagnostic tool can operates actuator forcefully, input/output value
monitoring and self diagnosis.
Inspection
1.
Emit intensive light toward the photo sensor using a lamp, and check
the output voltage change.
2.
The voltage will rise with higher intensive light and reduce with lower
intensive light.