Hyundai Santa Fe (TM): Blind-Spot View Monitor (BVM) / System malfunction
When Blind-Spot View Monitor is not working properly, or the cluster display flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer.
WARNING
- The image shown on the cluster may differ from the actual distance of the object. Make sure to directly check the vehicle's surroundings for safety.
- Always keep the camera lens clean. If the lens is covered with foreign material, it may adversely affect camera performance and Blind- Spot View Monitor may not operate normally.
Operating switch Turn Signal switch Blind-Spot View Monitor will turn on and off when the turn signal is turned on and off. Blind-Spot View Monitor Operating conditions When the left or right side turn signal turns on, the image in that direction is displayed on the instrument cluster.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: PTC Heater (Diesel only). Description and operation
Description The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective diesel engine.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation
Description and Operation Blcok Diagram • This system monitors the driving situations through the radar and the camera.