Hyundai Santa Fe (TM): Driver assistance system / Driving Convenience
- Smart Cruise Control (SCC)
- Navigation-based Smart Cruise Control (NSCC)
- Lane Following Assist (LFA)
- Highway Driving Assist (HDA)
Blind-Spot View Monitor displays the rear blind spot area of the vehicle in the cluster when the turn signal is turned on to help change lanes. Detecting sensor [1], [2] : SVM-side view camera (camera located at bottom of the mirror) Refer to the picture above for the detailed location of the detecting sensors.
Smart Cruise Control is designed to help detect the vehicle ahead and help maintain the desired speed and minimum distance between the vehicle ahead. Overtaking Acceleration Assist While Smart Cruise Control is operating, if the system judges that the driver is determined to overtake the vehicle in front, acceleration will be assisted.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Compressor. Description and operation
Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Condenser. Repair procedures
Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Vehicle auto-shut off. System Operation
- Auto Hold. Warning messages
- Troubleshooting
- New on site
- Most important about car
