Hyundai Santa Fe (TM): Suspension System / Special service tools

Special Service Tools
Tool (Number and Name)
IIIustration
Use
0K546-F6100
Shock absorber lock nut removal tool

Used for remove the front shock absorber lock nut
09546-S1100
Shock absorber lock nut removal tool

Used for remove the rear shock absorber lock nut

    Specifications Front Suspension Item Specification Suspension type MacPherson Strut Shock absorber Type HPD(High Performance Damper) Rear Suspension Item Specification Suspension type Multi link Shock absorber Type HPD(High Performance Damper Wheel & Tire Item Specification Front Rear Aluminum 17 inch 7.

    Troubleshooting Symptom Possible cause Remedy Hard steering Improper front wheel alignment Correct Excessive turning resistance of lower arm ball joint Replace Low tire pressure Adjust No power assist Repair and replace Poor return of steering wheel to center Improper front wheel alignment Correct Poor or rough ride Improper front wheel alignment Correct Malfunctioning shock absorber Repair or replace Broken or worn stabilizer Replace Broken or worn coil spring Replace Worn lower arm bushing Replace the lower arm assembly Abnormal tire wear Improper front wheel alignment Correct Improper tire pressure Adjust Malfunctioning shock absorber Replace Wandering Improper front wheel alignment Correct Poor turning resistance of lower arm ball joint Repair Loose or worn lower arm bushing Retighten or replace Vehicle pulls to one side Improper front wheel alignment Correct Excessive turning resistance of lower arm ball joint Replace Broken or worn coil spring Replace Bent lower arm Repair Steering wheel shimmy Improper front wheel alignment Correct Poor turning resistance of lower arm ball joint Replace Broken or worn stabilizer Replace Worn lower arm bushing Replace Malfunctioning shock absorber Replace Broken or worn coil spring Replace Wheel and tire diagnosis Rapid wear at the center Rapid wear at both shoulders Wear at one shoulder • Center-tread down to fabric due to excessive over inflated tires • Lack of rotation • Excessive toe on drive wheels • Heavy acceleration on drive • Under-inflated tires • Worn suspension components • Excessive cornering speeds • Lack of rotation • Toe adjustment out of specification • Camber out of specification • Damaged strut • Damaged lower arm Partial wear Feathered edge Wear pattern • Caused by irregular burrs on brake drums • Toe adjustment out of specification • Damaged or worn tie rods • Damaged knuckle • Excessive toe on non-drive wheels • Lack of rotation

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Compressor. Description and operation

    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: A/C Pressure Transducer. Description and operation

    Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0263