Hyundai Santa Fe (TM): Engine Mechanical System / Special service tools

Special Service Tools
Tool (Number and name)
Illustration
Use
Crankshaft front oil seal installer
(09214 - L1100)
(09231-H1100)

Installation of the front oil seal.
A : 09214 - L1100
B : 09231-H1100
Ring gear stopper
(09231-3D100)

Removal and installation of crankshaft pulley bolt.
Torque angle adapter
(09221-4A000)

Installation of bolts & nuts needing an angular method of adjustment.
Valve stem oil seal installer
(09222-4A000)

Installation of the valve stem oil seal.
Valve spring compressor & holder
(09222-3K000)
(09222-3K100)

Removal and installation of the intake or exhaust valve.
09222-3K100 (holder)
Crankshaft rear oil seal installer
(09231-H1100)
(09214 - L1200)

Installation of the crankshaft rear oil seal.
A : 09214 - L1200
B : 09231-H1100
Oil pan remover
(09215-3C000)

Removal of oil pan.
Water Pump Belt Remover & Installer
(09252-C1000)

Used for removing / installing water pump belt.

    Specifications Description Specifications Limit General Type In-line, DOHC   Number of cylinders 4   Bore 88.

    Compression Pressure Inspection    • If the there is lack of power, excessive oil consumption or poor fuel economy, measure the compression pressure.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Condenser. Repair procedures

    Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear View Monitor (RVM)

    Description and operation Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the H/UNIT or the ECM (Reverse Display Room Mirror) mirror while backing-up.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0214