Hyundai Santa Fe (TM): Engine Control System / Manifold Absolute Pressure Sensor (MAPS). Schematic diagrams
| Circuit Diagram |
Specification Pressure (kPa) Output Voltage (V) 20.0 0.79 46.7 1.
Inspection 1. Connect the diagnostic tool on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Auto Defogging Actuator. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defogging actuator operates to the open position when connecting 12V to terminal 3 and grounding terminal 6.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Troubleshooting
Troubleshooting 1) After replacing controller, always check that the system operates properly. 2) If the failure persists after replacing the controller, do not replace th