Hyundai Santa Fe (TM): Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation
| Description |
| • |
Line pressure control solenoid valve is attached to the valve body.
|
| • |
This variable force solenoid valve indirectly controls the hydraulic
pressure inside the line pressure.
|
Inspection • Refer to the DTC manual for the check procedure.
Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: A/C Pressure Transducer. Description and operation
Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Ambient Temperature Sensor. Description and operation
Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Suspension System
- Vehicle Information, Consumer Information and Reporting Safety Defects
- Instrument cluster
- New on site
- Most important about car
