Hyundai Santa Fe (TM): Blower / Intake Actuator. Description and operation
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator. Description and operation
| Description |
The intake actuator is located at the blower unit. It regulates the intake door
by a signal from the control unit. Pressing the intake selection switch will
shift between recirculation and fresh air modes.
Replacement 1. Remove the glove box. (Refer to Body - "Glove Box") 2. Remove the filter cover (A) by pressing the knob.
Components 1. Intake actuator
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Power Mosfet (DATC). Repair procedures
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until high speed.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Ultrasonic Sensor. Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3.
Categories
Copyright © 2025 www.hsafe4.com - 0.0142