Hyundai Santa Fe (TM): Automatic Transaxle Control System / Input Speed Sensor. Specifications
| Specifications |
|
Items |
Specifications |
|
|
Operation condition [°C(°F)] |
(-40 to 150) -40 to 302 |
|
|
Sensor length (mm) |
35.0 - 35.2 mm |
|
|
Air gap (mm) |
About 1.5 mm |
|
|
Output voltage(V) |
High |
1.18 - 1.68 |
|
Low |
0.59 - 0.84 |
|
Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM.
Inspection • Refer to the DTC manual for the check procedure.
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Smart Key. Repair procedures
Smart Key Smart Key Code Saving 1. Connect the DLC cable of diagnostic tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on diagnostic tool. 2.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Evaporator Temperature Sensor. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminal "+" and "-" of the evaporator temperature sensor.
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- Front Radar Unit. Repair procedures
- Auto Hold. Warning messages
- Vehicle Information, Consumer Information and Reporting Safety Defects
- New on site
- Most important about car
