Hyundai Santa Fe (TM): Engine Control System / Heated Oxygen Sensor (HO2S). Specifications

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Engine Control/Fuel System / Engine Control System / Heated Oxygen Sensor (HO2S). Specifications

Specification
HO2S [Bank 1 / Sensor 1] [Euro-V]
Item
Specification
Heater Resistance (Ω)
 2.5 - 4.0 [20°C (68°F)]

HO2S [Bank 1 / Sensor 1] [Except Euro-V]
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1Ω [21°C (69.8°F)]

HO2S [Bank 1 / Sensor 2]
A/F Ratio (λ)
Output Voltage (V)
RICH
 Approx. 0.9
LEAN
 Approx. 0.04

Item
Specification
Heater Resistance (Ω)
 3.3 - 4.1Ω [21°C (69.8°F)]

    Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter.

    Circuit Diagram Harness Connector [Bank 1 / Sensor 1] [Bank 1 / Sensor 2]

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Smart Key. Repair procedures

    Smart Key Smart Key Code Saving 1. Connect the DLC cable of diagnostic tool to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on diagnostic tool. 2.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Refrigerant Line. Repair procedures

    Replacement [Front suction & Liquid pipe assembly] 1. If a compressor is available, the air conditioner is operated for a few minutes in the engine idle state and then the engine is stopped. 2.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0229