Hyundai Santa Fe: Safe Exit Assist (SEA) / System settings

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driver assistance system / Driving Safety / Safe Exit Assist (SEA) / System settings

Setting functions for the system

Safe Exit Assist

With the engine on, select ‘Driver Assistance → Blind-Spot Safety → Safe Exit Assist (SEA) (or SEA (Safe Exit Assist)’ from the Settings menu to turn on Safe Exit Assist and deselect to turn off the system.

WARNING

The driver should always be aware of unexpected and sudden situations from occurring. If ‘Safe Exit Assist’ is deselected, the system cannot assist you.

Information

If the engine is restarted, Safe Exit Assist will maintain the last setting.

Warning Timing

With the engine on, select ‘Driver Assistance → Warning Timing’ from the Settings menu to change the initial warning activation time for Blind-Spot Safety system.

When the vehicle is first delivered, Warning Timing is set to ‘Normal’. If you change the Warning Timing, the warning time of other Driver Assistance systems may change.

Warning Volume

With the engine on, select ‘Driver Assistance → Warning Volume’ from the Settings menu to change the Warning Volume ‘High’, ‘Medium’ and ‘Low’ for Blind-Spot Safety system.

If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.

CAUTION

  • The setting of the Warning Timing and Warning Volume applies to all functions of the Safe Exit Assist.
  • Even though ‘Normal’ is selected for Warning Timing, if the vehicles approaches at high speed from the rear, the initial warning activation time may seem late.
  • Select ‘Late’ for Warning Timing when traffic is light.

    Safe Exit Assist (SEA)

    After the vehicle stops, when an approaching vehicle from the rear area is detected as soon as a passenger opens a door, Safe Exit Assist will warn the driver with a warning message and an audible warning to help prevent a collision...

    System operation

    Warning and control Collision warning when exiting vehicle When an approaching vehicle from the rear is detected, the ‘Watch (out) for traffic’ warning message will appear on the cluster, and an audible warning will sound...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Rear Glass. Repair procedures


    Removal    • In order to remove rear glass, use tools as follows shown in the picture. [Tools block diagram] ① Square wire ② Insert type wire grip [Tools assembly diagram] • Tighten square wire ① inserting it in the hole of Insert type wire grip ② 1...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Components and components location


    ..

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2024 www.hsafe4.com