Hyundai Santa Fe: Driving Safety / Safe Exit Assist (SEA)

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driver assistance system / Driving Safety / Safe Exit Assist (SEA)

After the vehicle stops, when an approaching vehicle from the rear area is detected as soon as a passenger opens a door, Safe Exit Assist will warn the driver with a warning message and an audible warning to help prevent a collision.

In addition, when the electronic child safety lock button is in the LOCK position and an approaching vehicle from the rear area is detected, the electronic child safety lock button will not unlock even if the driver presses the button to prevent the rear doors from opening.

CAUTION

Warning timing may vary depending on the speed of the approaching vehicle.

Detecting sensor

[1] : Rear corner radar

The rear corner radars are sensors located inside the rear bumper to detect the side and rear areas. Always keep the rear bumper clean for proper operation of Safe Exit Assist.

NOTICE

For more details on the precautions of the rear corner radars, refer to “Blind- Spot Collision Assist (BCA)” section in chapter 7.

System malfunction and limitations

System malfunction When Blind-Spot Safety system is not working properly, the ‘Check Blind-Spot Safety system(s)’ warning message will appear on the cluster, and the system will turn off automatically or the system will be limited...

System settings

Setting functions for the system Safe Exit Assist With the engine on, select ‘Driver Assistance → Blind-Spot Safety → Safe Exit Assist (SEA) (or SEA (Safe Exit Assist)’ from the Settings menu to turn on Safe Exit Assist and deselect to turn off the system...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Components and components location

Component Location Index Engine Room 1. Service port (High pressure) 2. A/C pressure transducer (APT) 3. Service port (Low pressure) 4. Compressor 5. Suction & Liquid pipe assembly 6. Expansion valve Interior 1...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: USB charger

The USB charger is designed to recharge batteries of small size electrical devices using a USB cable. The electrical devices can be recharged when the Engine Start/Stop button is in the ACC or ON (or START) position. The battery charging state may be monitored on the electrical device...