Hyundai Santa Fe: SRSCM / Seat Belt Buckle Switch (BS). Description and operation
The SRSCM monitors the status of the driver and front passenger seat belt buckle.
The SRSCM provides one pin each for the driver and front passenger seat belt
buckle status input. The seat belt buckle circuit operates from internal boost
voltage supplied by the SRSCM, and uses chassis ground for the signal return.
The buckle status modify the SRSCM deployment. If the buckle status is unbuckled,
the corresponding pretensioner will not be deactivated.
Removal
•
Removal of the airbag must be performed according to the precautions/procedures
described previously...
Other information:
Fan speed control
Turn the knob to the right to increase the fan speed and airflow. Turn the knob
to the left to decrease fan speed and airflow.
Setting the fan speed control knob to the “0” position turns off the fan.
NOTICE
Operating the fan speed when the ignition switch is in the ON position could
cause the battery to discharge...
Warning and control
Lane Following Assist
If the vehicle ahead and/or both lane markings are detected and your vehicle
speed is below 110 mph (180 km/h), the green
indicator light will illuminate on
the cluster, and the system will help center the vehicle in the lane by assisting
the steering wheel...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more