Hyundai Santa Fe: Ignition Coil / Schematic diagrams

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Engine Electrical System / Ignition System / Ignition Coil / Schematic diagrams

Circuit Diagram

Ignition Coil Connector Terminal Function

Ignition Coil Terminal Function

*Connected to number

Ignition Coil #1 (Cylinder #1)

Pin No	Description	Connected to
1	Ground	Chassic
2	Ignition Coil #1 Control	ECM Connector [93]
3	Ignition Coil #1/#4 Feedback	ECM Connector [82]
4	Battery Power (B+)	Main Relay

Ignition Coil #2 (Cylinder #2)

Pin No	Description	Connected to
1	Ground	Chassic
2	Ignition Coil #2 Control	ECM Connector [47]
3	Ignition Coil #2/#3 Feedback	ECM Connector [105]
4	Battery Power (B+)	Main Relay

Ignition Coil #3 (Cylinder #3)

Pin No	Description	Connected to
1	Ground	Chassic
2	Ignition Coil #3 Control	ECM Connector [116]
3	Ignition Coil #2/#3 Feedback	ECM Connector [105]
4	Battery Power (B+)	Main Relay

Ignition Coil #4 (Cylinder #4)

Pin No	Description	Connected to
1	Ground	Chassic
2	Ignition Coil #4 Control	ECM Connector [24]
3	Ignition Coil #1/#4 Feedback	ECM Connector [82]
4	Battery Power (B+)	Main Relay

Specifications

Specification Item Specification Rated Voltage (V) 13.5V Secondary Coil [Engine 1000RPM standard] Input voltage (V) 13...

Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery (-) terminal. 2. Remove the engine cover...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: System Operation

When all the conditions are satisfied, the Vehicle Auto-Shut Off operates and turns the engine off automatically after 60 minutes. A timer appears on the instrument cluster 30 minutes before vehicle shut off. Resetting cluster timer To reset the cluster timer, do one of following: Release the accelerator pedal or brake pedal after Vehicle Auto-Shut Off is complete...

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Good braking practices

WARNING Whenever leaving the vehicle or parking, always come to a complete stop and continue to depress the brake pedal. Shift the gear to the P (Park) position, then apply the parking brake, and press the Engine Start/Stop button to the OFF position...