Hyundai Santa Fe (TM): Ignition Coil / Specifications

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Engine Electrical System / Ignition System / Ignition Coil / Specifications

Specification
Item
Specification
Rated Voltage (V)
 13.5V
Secondary Coil [Engine 1000RPM standard]
Input voltage (V)
13.5V
Dwell Time (ms)
4.0 - 4.6
Spark current (mA)
Min. 90
Spark duration time (ms)
Min. 2.0
Igniter voltage (V)
400 - 500
Pin
4

Item
Specification
Engine Speed (RPM)
 1000
 2000
 3000
 4000
 5000
 6000
 7000
Dwell Time (ms)
 4.7
 4.7
 4.1
 3.4
 3.1
 2.8
 2.7
Secondary Coil Voltage (kV)
 41
 41
 41
 40
 38
 36
 35

    Troubleshooting Connector assembly status test 1. Remove the ignition coil connectors (A) and reinstall it. Test for changing position of each ignition coil A : Ignition coil w/ misfire code B : Ignition coil w/o misfire code    • Do not move with spark plug at the same time (move the ignition coil only)

    Circuit Diagram Ignition Coil Connector Terminal Function Ignition Coil Terminal Function *Connected to number Ignition Coil #1 (Cylinder #1) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #1 Control ECM Connector [93] 3 Ignition Coil #1/#4 Feedback 　ECM Connector [82] 4 Battery Power (B+) Main Relay Ignition Coil #2 (Cylinder #2) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #2 Control ECM Connector [47] 3 Ignition Coil #2/#3 Feedback 　ECM Connector [105] 4 Battery Power (B+) Main Relay Ignition Coil #3 (Cylinder #3) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #3 Control ECM Connector [116] 3 Ignition Coil #2/#3 Feedback 　ECM Connector [105] 4 Battery Power (B+) Main Relay Ignition Coil #4 (Cylinder #4) Pin No Description Connected to 1 Ground Chassic 2 Ignition Coil #4 Control ECM Connector [24] 3 Ignition Coil #1/#4 Feedback 　ECM Connector [82] 4 Battery Power (B+) Main Relay

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Mode Control Actuator. Repair procedures

    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to terminal 3 and grounding terminal 7.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Ultrasonic Sensor. Repair procedures

    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front/rear bumper. (Refer to Body - "Front Bumper Cover") (Refer to Body - "Rear Bumper Cover") 3.

    Categories

     
    Copyright © 2025 www.hsafe4.com - 0.0241