Hyundai Santa Fe: Ignition System / Schematic diagrams

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Engine Electrical System / Ignition System / Schematic diagrams

Schematic Diagrams

    Troubleshooting

    ..

    Repair procedures

    On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    • If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC...

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Pressure Sensor. Description and operation


    Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque value varies according to a pressure status...

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Quarter Garnish. Repair procedures


    Replacement    • Put on gloves to prevent hand injuries.    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2025 www.hsafe4.com