Hyundai Santa Fe: Auto Lighting Control System / Schematic diagrams

Specifications
Items
Specifications
Rated voltage
5V
Load
Max...
Inspection
Check if the auto light control operates like a timing chart shown below. Tail
lamp output and head lamp (Low) output is controlled based on the auto light
sensor's input (illumination intensity) when the Auto Light Switch in Multi-Function
Switch is turned ON, and the vehicle is in IGN1 or IGN2 ON Mode...
Other information:
Operating conditions
Navigation-based Smart Cruise Control is ready to operate if all of the following
conditions are satisfied:
Smart Cruise Control is operating
Driving on main roads of highways (or motorways)
Information
For more details on how to operate Smart Cruise Control, refer to “Smart Cruise
Control (SCC)” section in chapter 7...
Forward Safety
With the engine on, select ‘Driver Assistance - Forward Safety' from the Settings
menu to set whether or not to use each function.
- Id 'Active Assist' is selected, Forward Collision-Avoidance Assist
- will warn the driver with a warning message and an audible warning depending on
the collision risk levels...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more