Hyundai Santa Fe: Fuel Filler Door / Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body (Interior and Exterior) / Fuel Filler Door / Repair procedures

Replacement

•	Put on gloves to prevent hand injuries.

•	When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.

1.	Open the fuel filler door (A).

2.	Remove the luggage side trim. (Refer to interior trim - "Luggage Side Trim")

3.	Loosen the mounting nuts and remove the luggage cover (A).

4.	Separate to fuel filler door cable (B) from fuel door actuator (A).

5.	Separate to fuel filler door cable (A).

6.	Using a screwdriver or remover, remove the fuel filler door (A).

To install, reverse removal procedure.

•	Make sure the fuel filler door locks/unlocks and opens/closes properly.

•	Replace any damaged clips (or pin-type retainers).

Components and components location

Front Door

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Winter precautions

Use high quality ethylene glycol coolant Your vehicle is delivered with high quality ethylene glycol coolant in the cooling system. It is the only type of coolant that should be used because it helps prevent corrosion in the cooling system, lubricates the water pump and prevents freezing...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Identification Numbers

Identification Number Identification Number Description Vehicle Identification Number 1. World Manufacturer Identifier (WMI) - KMH : Passenger vehicle or MPV(Multipurpose Passenger Vehicle)/SUV(Sports Utility Vehicle)/RV(Recreational Vehicle) 2...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.