Hyundai Santa Fe: Rear Occupant Alert / Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body Electrical System / Rear Occupant Alert / Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cover (A) by using a flat-tip screwdriver.

3.
Disconnect the connector (A) and then remove the occupant alert sensor.

Installation
1.
Install the occupant alert sensor.
2.
Connect the negative (-) battery terminal.

    Components and components location

    ..

    Immobilizer System

    ..

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Antenna Coil. Repair procedures


    Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw...

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Battery. Specifications


    Specification ▷ CMF68L-DIN Item Specification Model type CMF68L-DIN Capacity [20HR/5HR] (AH) 68 / 54 Cold Cranking Amperage (A) 600 Reserve Capacity (Min) 110 Specific Gravity 1...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2025 www.hsafe4.com