Hyundai Santa Fe (TM): Seat Electrical / Power Seat Motor. Repair procedures
| Inspection |
| 1. |
Disconnect the connectors for each motor.
(Refer to Body - "Front Seat Assembly")
B : Rear height motor
C : Front height motor
D : Lumbar support motor (Horizontal)
E : Lumbar supprot motor (Vertical)
F : Recline motor
|
| 2. |
With the battery connected directly to the motor terminals, check if
the motors run smoothly.
|
| 3. |
Reverse the connections and check that the motor turns in reverse.
|
| 4. |
If there is an abnormality, replace the motors.
|
| 1. |
Disconnect the limit switch and operate the limit switch.
|
| 2. |
|
| 3. |
Make sure that the seat operation is normal in the reverse after the
maximum operation.
|
| 4. |
If there is an abnormality, replace the limit switch.
|
Inspection Basic Inspection 1. Basic inspection is performed as follows. (1) Check indicator after entering self - diagnosis mod.
Circuit Diagram Driver (Without IMS) Driver (With IMS) Passenger
Other information:
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Blower Resistor (Manual). Repair procedures
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation
Description Surround View Monitor (SVM) is the system that allows video monitoring of 360 degrees around the vehicle. The system includes 4 ultra optical camera mounted around the vehicle (front, both sides, rear). The video from these cameras are applied with distortion compensation, time point conversion, and video me
Categories
- Manuals Home
- Hyundai Santa Fe Owners Manual
- Hyundai Santa Fe Service Manual
- General Information
- Driver assistance system
- Front Radar Unit. Repair procedures
- New on site
- Most important about car
