Hyundai Santa Fe: Engine Control System / Manifold Absolute Pressure Sensor (MAPS). Specifications
Hyundai Santa Fe (TM) 2019-2025 Service Manual / Engine Control/Fuel System / Engine Control System / Manifold Absolute Pressure Sensor (MAPS). Specifications
| Specification |
|
Pressure (kPa) |
Output Voltage (V) |
|
20.0 |
0.79 |
|
46.7 |
1.84 |
|
101.3 |
4.0 |
Manifold Absolute Pressure Sensor (MAPS). Description and operation
Description
Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and
is installed on the surge tank. It senses absolute pressure of the surge tank
and transfers the analog signal proportional to the pressure to the ECM...
Other information:
Hyundai Santa Fe (TM) 2019-2025 Service Manual: Cluster Fascia Panel. Repair procedures
Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Hyundai Santa Fe (TM) 2019-2025 Service Manual: Rear Cross Member. Repair procedures
Removal 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from the front hub. Tightening torque : 107...
Categories
- Manuals Home
- 4th Generation Santa Fe Owners Manual
- 4th Generation Santa Fe Service Manual
- Child-protector rear door locks
- Electronic child safety lock
- Body (Interior and Exterior)
- New on site
- Most important about car
Air bag - supplemental restraint system
1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag
4. Curtain air bag
The vehicles are equipped with a Supplemental Air Bag System for the driver’s seat and front passenger’s seats.
The front air bags are designed to supplement the three-point seat belts. For these air bags to provide protection, the seat belts must be worn at all times when driving.
Copyright © 2025 www.hsafe4.com