| Inspection |
| Replacement |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rain sensor inner cover (A) and rain sensor cover (B).
|
| 3. |
Separate the auto defogging sensor connector (A) and remove the auto
defogging sensor (A).
|
| 4. |
Install in the reverse order of removal.
|
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging.
Heater Unit. Components and components location Component Location 1. Heater Unit Assembly Components 1.
Description and operation Description Burglar Alarm State [B/A State] B/A State Description DISARM 1) In "DISARM" state, no vehicle start inhibition.
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the evaporator temperature sensor connector. 3. Measure resistance between terminal "+" and "-" of the evaporator temperature sensor.