| Specifications |
|
Items |
Specifications |
|
|
Operation condition [°C(°F)] |
(-40 to 150) -40 to 302 |
|
|
Sensor length (mm) |
35.0 - 35.2 mm |
|
|
Air gap (mm) |
About 1.5 mm |
|
|
Output voltage(V) |
High |
1.18 - 1.68 |
|
Low |
0.59 - 0.84 |
|
Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transaxle and delivers the readings to the TCM.
Inspection • Refer to the DTC manual for the check procedure.
Components and components location Component Location 1. Panorama sunroof 2. Panorama sunroof switch 3. Panorama sunroof motor & controller 4. Roller blind motor & slave controller Schematic diagrams Circuit Diagram Connector Pin Information No
Replacement 1. Using a Lwrench, remove the cap (A) on the bottom of the receiver-drier. 2. Remove the receiver-drier (A) from condenser using a long nose plier. Check for crumbled receiver-drier and clogged bottom cap filter.