Hyundai Santa Fe: Front Seat Belt / Front Seat Belt Buckle. Repair procedures
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
|
2. |
Disconnect the front seat belt buckle connector wiring (A).

|
3. |
After loosening the mounting bolt, then remove the front seat belt buckle
(A).
Tightening torque :
39.2 - 53.9 N.m (4.0 - 5.5 kgf.m, 28.9 - 39.8 lb-ft)
|

|
4. |
To install, reverse removal procedure.
• |
Make sure the connector is plugged in properly.
|
|
|
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure
resistance between the ECTS terminals 3 and 4...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the VIS valve connector.
3.
Measure resistance between VIS valve terminals 1 and 2.
Specification : Refer to "Specification"
Removal
1...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more