Hyundai Santa Fe: SRSCM / Front Impact Sensor (FIS). Components and components location
1. Front impact
sensor (FIS) [RH]
|
2. Front impact
sensor (FIS) [LH]
|
Description
The front impact sensor (FIS) is installed in the Front End Module (FEM). They
are remote sensors that detect acceleration due to a collision at its mounting
location...
Removal
•
Do not turn the ignition switch ON and do not connect the battery
cable while replacing the front impact sensor...
Other information:
..
Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS module (B) after disconnecting the connector (A) and
loosening the screws (3EA)...
Categories
The armrest is located in the center of the rear seat. Pull the armrest down
from the seatback to use it.
read more