Hyundai Santa Fe: Fuel Delivery System / Filler-Neck Assembly. Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Engine Control/Fuel System / Fuel Delivery System / Filler-Neck Assembly. Repair procedures

Removal

1.	Turn the ignition switch OFF and disconnect the battery (-) terminal.

2.	Lift the vehicle.

3.	Remove the rear-left wheel & tire and wheel house cover.

4.	Open the fuel filler cap (A) by turning it in the counterclockwise.

5.	Separate the fuel filler hose (A).

6.	Disconnect the ventilation hose quick-connector (B)

7.	Disconnect the leveling hose quick-connector (C).

Remove the filler-neck assembly (A) after loosening the mounting nut (B).

Tightening Torque :

7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

Installation

1.	Install in the reverse order of removal.

Fuel Line. Repair procedures

Removal • Be careful not to damage the parts located under the vehicle (floor under cover, canister, fuel tank) when raising the vehicle using the lift...

Accelerator Pedal. Repair procedures

Removal 1. Turn the ignition switch OFF and disconnect the battery (-) terminal. 2. Disconnect the accelerator position snesor connector (A)...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Description and operation

Description Electronic parking brake (EPB) is motor driven braking system operated by a switch instead of pulling or depressing the lever to engage the brake. Pressing the button will deliver the electronic signal to ECU, and the ECU operates EPB actuator which consists of the gear and the motor...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Front Impact Sensor (FIS). Repair procedures

Removal • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor...