Hyundai Santa Fe: Fuel Delivery System / Accelerator Pedal. Repair procedures
1. |
Turn the ignition switch OFF and disconnect the battery (-) terminal.
|
2. |
Disconnect the accelerator position snesor connector (A).
|
3. |
Disconnect the mounting cap (A).
|
4. |
Remove the accelerator pedal module from the vehicle after loosening
the mounting bolt (A).
Tightening Torque :
8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb.ft)
|
|
1. |
Install in the reverse order of removal.
|
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2.
Lift the vehicle...
Removal
1.
Release the residual pressure in fuel line.
Release the residual pressure in fuel line.
2...
Other information:
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the steering wheel.
(Refer to - "Steering Wheel")
3.
Remove the steering columm shround...
We recommend that the engine oil and filter be changed by an authorized HYUNDAI
dealer according to the Maintenance Schedule at the beginning of this chapter.
WARNING
CALIFORNIA PROPOSITION 65 WARNING
Engine oil contains chemicals known to the State of California to cause cancer,
birth defects and reproductive harm...
Categories
1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more