Hyundai Santa Fe: Power Tailgate Module / Components and components location

1. Buzzer
2. Console S/W
3. RKE
4. Anti Pinch Strip
|
5. Spindle Drive
6. Tailgate Trim Switch
7. Power Latch
8. PTG Control Module
|
Description
Power tailgate is an electro-mechanical system designed to provide power opening
and closing of the tailgate through the push of a button of a remote key (fob),
console switch, inner switch or an outside handle switch of the tailgate...
Inspection
Tailgate normal operation transmit / receive process
•
FOB key Switch : FOB key Switch → BMC / SMK → CAN communication
→ PTG Module
•
Driver Switch : Driver Switch → Wiring → PTG Module
•
Outer Switch : Outer Switch → Wiring → SJB → CAN communication
→ PTG Module
① Press the power tailgate open switch
② Transmit / receive power tailgate open signal via CAN communication and wiring
③ Power tailgate open
•
The operation of the power tailgate is activated by mutual communication
with the vehicle's module and switch...
Other information:
Opening the liftgate
To open the liftgate:
1. Make sure you have the smart key in your possession.
2. Press either the liftgate open/close button on the vehicle or press and hold
the liftgate open button on the smart key for more than one second. The hazard warning
lights will blink two times and the liftgate will open...
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more