| Removal |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the rear console cover.
(Refer to Body - "Rear Console Cover")
|
| 3. |
Remove the power outlet cover (A).
|
| 4. |
Remove the power outlet switch (A) on the bracket.
|
| Installation |
| 1. |
Install the power outlet switch.
|
| 2. |
Install the power outlet cover.
|
| 3. |
Connect the negative (-) battery terminal.
|
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the right luggage side trim.
Inspection 1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replaced. (After removing the resistor) Replacement 1.
Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information.