| Circuit Diagram |


Specification Item Specification Coil resistance (Ω) 30.0 - 35.0 [20°C (68°F)]
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector.
Oil Specification 1. The R-134a or R-1234yf system requires synthetic (PAG) compressor oil whereas the R-12 system requires mineral compressor oil. The two oils must never be mixed. 2.
Inspection 1. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 2. The voltage will rise with higher intensive light and reduce with lower intensive light.