Hyundai Santa Fe (TM): 4 Wheel Drive (4WD) System / Special service tools

Special Service Tools
Engine
Tools
(Number and name)
Illustration
Use
Diesel 2.2 TCI
Oil seal installer
09473-D3600

Used for installing the transfer case oil seal (Driveshaft side)
(Used with the handle)
Handle
09231-H1100

Used for installing the transfer case oil seal
(Used with the oil seal installer)
Gasoline 2.5 MPI
&
Gasoline 3.5 MPI
Oil seal #1 installer
0K473-P2100

Used for installing the transfer case oil seal #1 (Driveshaft side)
(Used with the handle)
Oil seal #2 installer
0K473-P2200

Used for installing the transfer case oil seal #2 (Driveshaft side)
(Used with the handle)
Oil seal #3 installer
0K473-P2300

Used for installing the transfer case oil seal #3 (Driveshaft side)
(Used with the handle)
Oil seal installer
0K473-P2400

Used for installing the transfer case (Transaxle side)
(Used with the handle)
Handle
09231-H1100

Used for installing the transfer case oil seal
(Used with the oil seal installer)

    Specifications Tightening Torques Items N.m Kgf.m lb-ft Transfer assembly mounting bolts 60.

    Transfer Fluid. Repair procedures Inspection    • Transfer oil should be inspected and refilled every 60,000 km (40,000 mile) / 4 year.

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Compressor. Description and operation

    Description The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperature refrigerant gas into high pressure and high temperature refrigerant gas.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Condenser. Repair procedures

    Inspection 1. Check the condenser fins for clogging and damage. If clogged, clean them with water, and blow them with compressed air. If bent, gently bend them using a screwdriver or pliers. 2.

    Categories

     
    Copyright © 2026 www.hsafe4.com - 0.0216