Hyundai Santa Fe (TM): Airbag Module / Side Airbag (SAB) Module. Description and operation
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when a side crash occurs. The SRSCM determines
deployment of the side airbag by using the Side Impact Sensor (SIS) signal.
| •
|
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2.
Components
1. Side airbag
(SAB)
Other information:
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation.
Replacement
•
When removing with a flat-tip screwdriver or remover, wrap protective
tape around the tools to prevent damage to components.