Hyundai Santa Fe (TM): SRSCM / Seat Belt Buckle Switch (BS). Description and operation

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS). Description and operation

Description
The SRSCM monitors the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.

    Removal    • Removal of the airbag must be performed according to the precautions/procedures described previously.

    Components 1. Seat belt buckle switch (BS)

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Blower Unit. Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Recover the refrigerant with a recovery/recycling/charging station. 3. When the engine is cool, drain the engine coolant from the radiator.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Description and operation

    Description Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position. This system is a supplemental system that shows behind the vehicle through the H/UNIT or the ECM (Reverse Display Room Mirror) mirror while backing-up.

    Categories

     
    Copyright © 2025 www.hsafe4.com - 0.0158