Hyundai Santa Fe: Highway Driving Assist (HDA) / System settings
Setting functions for the system
Highway Driving Assist
.png)
With the engine on, select or deselect ‘Driver Assistance → Driving Convenience’ from the Settings menu to set whether or not to use the following function(s).
-- If ‘Highway Driving Assist’ (or ‘HDA (Motorway Driving Assist)’) is selected, it helps maintain distance from the vehicle ahead, maintain the set speed, and helps center the vehicle in the lane.
Information
- If there is a problem with the function(s), the settings cannot be changed. We recommend that the system be inspected by an authorized HYUNDAI dealer.
- If the engine is restarted, the function(s) will maintain the last setting.
WARNING
For your safety, change the Settings after parking the vehicle at a safe location.
Warning Volume
.png)
With the engine on, select ‘Driver Assistance → Warning Volume’ from the Settings menu to change the Warning Volume to ‘High’, ‘Medium’ or ‘Low’ for Hands-off warning.
If you change the Warning Volume, the Warning Volume of other Driver Assistance systems may change.
Highway Driving Assist (HDA)
Highway Driving Assist is designed to help detect vehicles and lanes ahead, and
help maintain distance from the vehicle ahead, maintain the set speed, and help
center the vehicle in the lane while driving on the highway (or motorway)...
System operation
System display and control
You can see the status of the Highway Driving Assist operation in the Driving
Assist mode on the cluster. Refer to “LCD Display Modes” section in chapter 4...
Other information:
Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Driver Attention Warning (DAW)
Basic function Driver Attention Warning will help determine the driver's attention level by analyzing driving pattern, driving time, etc. while vehicle is being driven. The system will recommend a break when the driver’s attention level falls below a certain level...
Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: System operation
Operating button Parking/View button Press the Parking/View button (1) to turn on Rear View Monitor. Press the button again to turn off the system. Rear view Operating conditions Shift the gear to R (Reverse), the image will appear on the screen. Press the Parking/View button (1) while the gear is in P (Park), the image will appear on the screen...
Categories
- Manuals Home
- 4th Generation Santa Fe Owners Manual
- 4th Generation Santa Fe Service Manual
- Rear seats
- Body (Interior and Exterior)
- Instrument panel overview
- New on site
- Most important about car
Air bag collision sensors
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:
Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.