Hyundai Santa Fe: Surround View Monitor (SVM) / System operation

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driver assistance system / Parking Safety / Surround View Monitor (SVM) / System operation

Operating button

  • Press the Parking/View button (1) to turn on Surround View Monitor. Press the button again to turn off the system.
  • Other view modes can be selected by touching the view icons (2) on the Surround View Monitor screen.
  • When one of the infotainment system button (3) is pressed without the gear in R (Reverse), Surround View Monitor will turn off.

Front view

The front image is displayed on the screen when the gear is in N (Neutral) or D (Drive) to assist in parking. The front view has a top view/front view/side view.

Operating conditions

  • Front view function will operate when the following conditions are satisfied:
    -- While the infotainment system screen is being displayed, press the Parking/View button (1) briefly when the gear is in D (Drive) or N (Neutral) and vehicle speed is below 9 mph (15 km/h).
  • Surround View Monitor Auto On function will operate when the following conditions are satisfied:
    -- With ‘Driver Assistance → Parking Safety → Surround View Monitor Auto On’ selected from the Settings menu, the front parking assist view screen is displayed when Parking Distance Warning warns the driver while driving in D (Drive).

Off conditions

  • Press the Parking/View button (1) again, the image will turn off.
  • When vehicle speed is above 9 mph (15 km/h) with the gear in D (Drive), Surround View Monitor will turn off and the screen will change back to the previous infotainment system screen. Although you drive below 9 mph (15 km/h) again, Surround View Monitor will not turn on.
  • Press one of the infotainment system button (3), the screen will change to the infotainment system screen.
  • Shift the gear to P (Park), the image will turn off.

Rear view

The rear image is displayed on the screen when the gear is in R (Revers) or P (Park) to assist in parking. The rear view has a top view/rear view/side view.

Operating conditions

  • Shift the gear to R (Reverse), the image will appear on the screen.
  • Press the Parking/View button (1) while the gear is in P (Park), the image will appear on the screen. However, parking guidance is not displayed.

Off conditions

  • The image cannot be turned off when the gear is in R (Reverse).
  • Shift the gear from R (Reverse) to P (Park), the image will turn off.
  • Press the Parking/View button (1) again while the gear is in P (Park) with the image on the screen.

    System settings

    Camera settings You can change Surround View Monitor ‘Display Contents’ or ‘Display Settings’ by touching the setup icon () on the screen while Surround View Monitor is operating, or selecting ‘Driver Assistance → Parking Safety → Camera Settings’ from the Settings menu while the engine is on...

    System malfunction and limitations

    System malfunction When Surround View Monitor is not working properly, or the screen flickers, or the camera image does not display normally, we recommend that the system be inspected by an authorized HYUNDAI dealer...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Description and operation


    Description Burglar Alarm State [B/A State] B/A State Description DISARM 1) In "DISARM" state, no vehicle start inhibition. So, when door, hood, or Tailgate is opened, there is no alarm sound and flashing...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Accelerator Position Sensor (APS). Specifications


    Specification Accelerator Position Output Voltage (V) [Vref=5V] APS 1 APS 2 C.T 0.7 - 0.8 0.33 - 0.43 W.O.T 3.98 - 4...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2024 www.hsafe4.com