Hyundai Santa Fe (TM): Parking Safety / Surround View Monitor (SVM)


Surround View Monitor can help assist in parking using the cameras installed
on the vehicle and displays images around the vehicle through the infotainment system
screen.
- Parking Assist View function helps the driver to see the surroundings
of the vehicle in a parking situation in various view modes.
Camera


[1] : SVM-front view camera, [2],[3] : SVM-side view camera (under the side view
mirror), [4] : SVM-rear view camera
Refer to the picture above for the detailed location of the cameras.
System settings
Camera settings

- You can change Surround View Monitor ‘Display Contents’ or ‘Display Settings’
by touching the setup icon (
) on
the screen while Surround View Monitor is operating, or selecting ‘Driver Assistance
→ Parking Safety → Camera Settings’ from the Settings menu while the engine
is on.
- In the Display Contents, you can change settings for ‘Top View Parking
Guidance’, ‘Rear View Parking Guidance’ and ‘Parking Distance Warning’.
- In the Display Settings, you can change the screen’s ‘Brightness’ and
‘Contrast’.
Top View Parking Guidance

- When the ‘Top View Parking Guidance’ is selected, parking guidance is
displayed on the right side of the Surround View Monitor screen.
- You may see the front top view or the rear top view when using Top View
Parking Guidance.
Rear View Parking Guidance

- When the ‘Rear View Parking Guidance’ is selected, parking guidance is
displayed in the rear view.
- The horizontal guideline of the Rear View Parking Guidance shows the distance
of 1.6 ft (0.5m), 3.3 ft (1 m) and 7.6 ft (2.3m) from the vehicle.
Parking Distance Warning

- When the ‘Parking Distance Warning’ is selected, parking distance warning
is displayed on the right side of the Surround View Monitor screen.
- The image will be displayed only when Parking Distance Warning is warning
the driver.
Surround View Monitor Auto On
With the engine on, select ‘Driver Assistance → Parking Safety → Surround View
Monitor Auto On’ from the Settings menu to use the function.
To use this function, refer to “System Operation”.
System operation
Operating button


- Press the Parking/View button (1) to turn on Surround View Monitor. Press
the button again to turn off the system.
- Other view modes can be selected by touching the view icons (2) on the
Surround View Monitor screen.
- When one of the infotainment system button (3) is pressed without the
gear in R (Reverse), Surround View Monitor will turn off.
Front view
The front image is displayed on the screen when the gear is in N (Neutral) or
D (Drive) to assist in parking. The front view has a top view/front view/side view.
Operating conditions
- Front view function will operate when the following conditions are satisfied:
-- While the infotainment system screen is being displayed, press the Parking/View
button (1) briefly when the gear is in D (Drive) or N (Neutral) and vehicle
speed is below 9 mph (15 km/h).
- Surround View Monitor Auto On function will operate when the following
conditions are satisfied:
-- With ‘Driver Assistance → Parking Safety → Surround View Monitor Auto On’
selected from the Settings menu, the front parking assist view screen is displayed
when Parking Distance Warning warns the driver while driving in D (Drive).
Off conditions
- Press the Parking/View button (1) again, the image will turn off.
- When vehicle speed is above 9 mph (15 km/h) with the gear in D (Drive),
Surround View Monitor will turn off and the screen will change back to the previous
infotainment system screen. Although you drive below 9 mph (15 km/h) again,
Surround View Monitor will not turn on.
- Press one of the infotainment system button (3), the screen will change
to the infotainment system screen.
- Shift the gear to P (Park), the image will turn off.
Rear view
The rear image is displayed on the screen when the gear is in R (Revers) or P
(Park) to assist in parking. The rear view has a top view/rear view/side view.
Operating conditions
- Shift the gear to R (Reverse), the image will appear on the screen.
- Press the Parking/View button (1) while the gear is in P (Park), the image
will appear on the screen. However, parking guidance is not displayed.
Off conditions
- The image cannot be turned off when the gear is in R (Reverse).
- Shift the gear from R (Reverse) to P (Park), the image will turn off.
- Press the Parking/View button (1) again while the gear is in P (Park)
with the image on the screen.
System malfunction and limitations
System malfunction
When Surround View Monitor is not working properly, or the screen flickers, or
the camera image does not display normally, we recommend that the system be inspected
by an authorized HYUNDAI dealer.
Limitations of the system
- When the vehicle is stopped for a long time in winter or when the vehicle
is parked in an indoor parking lot, the exhaust fumes may temporarily blur the
image.
- The screen may be displayed abnormally, and an icon will appear at the
top left side of the screen under the following circumstances:
-- The liftgate is opened
-- The driver or front passenger door is opened
-- The side view mirror is folded
WARNING
- ALWAYS look around your vehicle to make sure there are no objects or obstacles
before moving the vehicle. What you see on the screen may differ from the actual
vehicle’s location.
- The image shown on the screen may differ from the actual distance of the
object. Make sure to directly check the vehicle's surroundings for safety.
- When the rear view is displayed while driving, an icon (
)
appears at the top right side of the infotainment system screen to inform the
driver the rear view is being displayed. Do not be confused with the front wide
view image.
- Surround View Monitor is designed to be used on a flat surface. Therefore,
if used on roads with different heights such as curbs and speed bumps, the image
in the screen my not look correct.
- Always keep the camera lens clean. If the lens is covered with foreign
material, it may adversely affect camera performance and Surround View Monitor
may not operate normally.
Rear View Monitor will show the area behind the vehicle to assist you when parking
or backing up.
Camera
[1] : Rear view camera
Refer to the picture above for the detailed location of the camera.
Rear Cross-Traffic Collision-Avoidance Assist is designed to help detect vehicles
approaching from the left and right side while your vehicle is reversing, and warn
the driver that a collision is imminent with a warning message and an audible warning.
Other information:
Description and operation
Description
AVN system
The AVN system has improved information search and easiness of manipulation
for the driver by simplifying the system operation experience and unifying the
display of the user information such as multimedia and car information.
Description
The SMART KEY system is a system that allows the user to access and operate
a vehicle in a very convenient way. To access the vehicle, no traditional key
or remote control unit is needed.
The user carries a SMART KEY FOB which does not require any conscious actions
by the user (e.