Hyundai Santa Fe: Integrated memory system / Storing memory positions
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.
2. Adjust the driver’s seat position, side view mirror position, steering wheel
position, instrument panel illumination intensity and head-up display height/brightness
to the desired position.
3. Press the SET button. The system will beep once and notify you ‘Press button
to save settings’ on the cluster LCD display.
4. Press one of the memory buttons (1 or 2) within 4 seconds. The system will
beep twice when the memory has been successfully stored.
5. ‘Driver 1 (or 2) settings saved’ will appear on the cluster LCD display. The
message appears only for the driver’s seat position memory setting.
Integrated Memory System for the driver’s seat is provided to store and recall
the following memory settings with a simple button operation.
Driver’s seat position
Side View mirror position
WARNING
Never attempt to operate the integrated memory system while the vehicle is
moving...
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.
2. Press the desired memory button (1 or 2). The system will beep once, and then
the driver’s seat position, side view mirror position, steering wheel position,
instrument panel illumination intensity and head-up display height/ brightness will
automatically adjust to the stored positions...
Other information:
Removal
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
When adjusting the steering wheel to a comfortable position, adjust the steering
wheel so that it points toward your chest, not toward your face. Make sure you can
see the instrument cluster warning lights and gauges. After adjusting, push the
steering wheel both up and down to be certain it is locked in position...