Hyundai Santa Fe: Restraint / Specifications

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Restraint / Specifications

Tightening Torques

Item	N.m	kgf.m	lb-ft
Passenger Air Bag	7.8 - 11.8	0.8 - 1.2	5.8 - 8.7
Curtain airbag (CAB) bolt	7.8 - 11.8	0.8 - 1.2	5.8 - 8.7
Curtain airbag (CAB) nut	3.9 - 5.9	0.4 - 0.6	2.9 - 4.3
Side airbag (SAB)	7.8 - 11.8	0.8 - 1.2	5.8 - 8.7
Seat belt anchor bolt (BPT)	39.2 - 53.9	4.0 - 5.5	28.9 - 39.7
SRS control module (SRSCM)	10.8 - 12.7	1.0 - 1.3	7.2 - 9.4
Front impact sensor (FIS)	7.8 - 10.8	0.8 - 1.0	5.8 - 7.2
Gravity side impact sensor (P-SIS)	7.8 - 10.8	0.8 - 1.0	5.8 - 7.2
Pressure side impact sensor (G-SIS)	7.8 - 10.8	0.8 - 1.0	5.8 - 7.2
Rear Gravity side impact sensor (R-SIS)	2.5 - 2.9	0.25 - 0.3	1.8 - 2.2

General information

General The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by activating and deploying the driver, passenger, side airbag and belt pretensioner in certain frontal or side collisions...

Special service tools

Special Service Tools Tool(Number and Name) Illustration Use Deployment tool 0957A-34100A Airbag deployment tool...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Troubleshooting

Troubleshooting Diagnosis with Diagnostic tool 1. In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool). The diagnostic system (Diagnostic tool) provides the following information...

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Vehicle load limit

Two labels on your driver’s door sill show how much weight your vehicle was designed to carry: the Tire and Loading Information Label and the Certification Label. Before loading your vehicle, familiarize yourself with the following terms for determining your vehicle’s weight ratings, from the vehicle’s specifications and the Certification Label: Base Curb Weight This is the weight of the vehicle including a full tank of fuel and all standard equipment...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.