Hyundai Santa Fe: Seat Electrical / Seat Heater Switch. Repair procedures
|
1. |
Disconnect the negative (-) battery terminal.
|
|
2. |
Remove the console upper cover (A).

|
|
3. |
Press the lock pin, separate the connectors (A).

|
|
4. |
Remove the seat heater switch (A) and SBW switch assembly after loosening
mounting screws.

|
|
1. |
Install the front seat heater switch.
|
|
2. |
Connect the negative (-) battery terminal.
|
Components
Driver/Passenger Seat Heater
1. Seat cushion
heater
2. Seat heater unit (Passenger only)
3. Seat back
heater
Second Line Seat Heater
1...
Other information:
Description
System Overview
The System offers the following features:
–
Changing the state of engine ignition and power by using the start button.
–
Controlling external relays for ACC / IGN1 / IGN2 terminal switching
and STARTER, without use of mechanical ignition switch...
WARNING
Improperly positioned seat belts may increase the risk of serious injury in
an accident. Take the following precautions when adjusting the seat belt:
Position the lap portion of the seat belt as low as possible across
your hips, not on your waist, so that it fits snugly...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more