Hyundai Santa Fe: Crankcase Emission Control System / Schematic diagrams

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Emission Control System / Crankcase Emission Control System / Schematic diagrams

Schematic Diagram

1. PCV Valve
2. Breather hose
3. Air intake hose

4. Intake maifold
5. Air breather hose
6. Cylinder block

Crankcase Emission Control System

Positive Crankcase Ventilation (PCV) Valve. Description and operation

Description Pressure Regulating Valve (PRV) is installed to prevent the over pressure of combustion gas through the piston ring and onto the crankcase...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Wheel. Repair procedures

Hub nut tightening sequence 1. Tighten the hub nuts as follows. Tightening torque: 107.9 - 127.5 N.m (11.0 - 13.0 kgf.m, 79.6 - 94.0 lb-ft) • When using an impact gun, final tightening torque should be checked using a torque wrench...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Checking the tire inflation pressure

1. After driving approximately 4~6 miles (7~10 km or about 10 minutes), stop at a safe location. 2. Connect the connection hose (3) of the compressor and tire into the tire valve. 3. Connect cables (4) to the battery. 4. Adjust the tire inflation pressure to the recommended tire inflation...

Categories

Power adjustment

The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.

WARNING

NEVER allow children in the vehicle unattended. The power seats are operable when the vehicle is turned off.