Hyundai Santa Fe: Hood / Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body (Interior and Exterior) / Hood / Repair procedures

Adjustment

1.	After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt.

2.	Adjust the hood height by moving the hood overslam bumpers (C) up and down.

3.	After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up and down or from side to side.

Hood Assembly. Components and components location

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Spark Plug. Specifications

Specification Item Specification Type SILZKR7K11S SILZKR8J9GS Gap 1.0 - 1.1 mm (0.0394 - 0.0433 in.) 0.8 - 0.9 mm (0.0315 - 0...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Engine Mounting. Repair procedures

Removal and Installation • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.