Hyundai Santa Fe: Brake System / Brake Booster. Components and components location
1. Reservoir
cap
2. Reservoir
3. Brake booster
|
4. Master cylinder
5. Push rod
|
Inspection
Operation and Leakage Check
1.
Brake Booster (A)
(1)
Check brake operation by applying the brakes during a test drive...
Brake Booster Operating
Test
1.
Run the engine for one or two minutes, and then stop it. If the pedal
depresses fully the first time but gradually becomes higher when depressed
succeeding times, the booster is operating properly, if the pedal height
remains unchanged, the booster is inoperative...
Other information:
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the ECTS connector.
3.
Remove the ECTS.
4.
After immersing the thermistor of the sensor into engine coolant, measure
resistance between the ECTS terminals 3 and 4...
Removal
[G 2.5 T-GDI THETA III (Only)]
1.
Disconnect the batter ( - ) cable.
2.
Remove the retaining clip then remove the vacuum pump hose (A).
3.
Remove the vacuum pump connector (A)...
Categories
1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag
4. Curtain air bag
The vehicles are equipped with a Supplemental Air Bag System for the driver’s
seat and front passenger’s seats.
The front air bags are designed to supplement the three-point seat belts. For
these air bags to provide protection, the seat belts must be worn at all times when
driving.
read more