Hyundai Santa Fe: Climate control additional features / Recirculating air when washer fluid is used

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Climate control additional features / Recirculating air when washer fluid is used

Recirculation mode automatically activates to reduce any objectionable scent of the washer fluid from entering the cabin when the windshield washer is used.

Turning Activate upon Washer Fluid Use ON or OFF

Climate control system

To turn the Activate upon Washer Fluid Use feature on or off, select Floor level () mode, and then press the air intake control () button four times within two seconds while pressing the A/C icon.

When Activate upon Washer Fluid Use ON is turned on, the air intake control button indicator will blink 6 times. When turned off, the indicator will blink 3 times.

Infotainment system

Activate upon Washer Fluid Use can be turned on and off by selecting 'Setup - Vehicle Settings - Climate - Recirculate Air - Activate upon Washer Fluid Use (or Interlocking washer fluid)’ from the infotainment system screen. For detailed information, refer to the separately supplied infotainment system manual.

However, in cold weather to prevent the windshield from fogging up, the recirculation mode may not be selected.

    Auto dehumidify

    To increase cabin air quality and reduce windshield misting, recirculation mode switches off automatically after about 5 to 30 minutes, depending on the outside temperature, and the air intake will change to fresh mode...

    Sunroof inside air recirculation. Auto. Controls That Use Climate Control Settings (for driver’s seat)

    Sunroof inside air recirculation When the is sunroof opened, fresh mode will be automatically selected. At this time, if you press the air intake control button, recirculation mode will be selected but will change back to fresh mode after 3 minutes...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: If the engine overheats


    If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine may be overheating. If this happens, you should: 1. Pull off the road and stop as soon as it is safe to do so. 2. Shift the gear to P (Park) and set the parking brake...

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: System operation


    Warning and control Collision warning when exiting vehicle When an approaching vehicle from the rear is detected, the ‘Watch (out) for traffic’ warning message will appear on the cluster, and an audible warning will sound. Safe Exit Assist will warn the driver when your vehicle speed is below 2 mph (3 km/h), and the speed of the approaching vehicle from the rear is above 3 mph (5 km/h)...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2024 www.hsafe4.com