| Replacement |
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim")
|
| 3. |
Separate the blower motor connector (A) and loosen the mounting screws
and remove the blower motor (B).
|
| 4. |
Install in the reverse order of removal.
|
Replacement 1. Remove the rear heater & A/C unit. (Refer to Rear Heater - "Rear Heater Unit") 2.
Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor.