Hyundai Santa Fe: Automatic Transaxle Control System / Output Speed Sensor. Description and operation
The output speed sensor is a vital unit that measures the rate of rotation of
the transaxle's turbine shaft and output shaft, and delivers the readings to
the TCM. The sensor provides critical input data that's used in feedback control,
damper clutch control, gear setting control, line pressure control, clutch activation
pressure control, and sensor fault analysis.

Inspection
•
Refer to the DTC manual for the check procedure...
Specifications
▷ Type : Hall effect sensor
▷ Specifications
Items
Specifications
Operation condition [°C(°F)]
(-40 to 150) -40 to 302
Output voltage(V)
High
1...
Other information:
If the tire is worn evenly, a tread wear indicator will appear as a solid band
across the tread. This shows there is less than 1/16 inch (1.6mm) of tread left
on the tire. Replace the tire when this happens.
Do not wait for the band to appear across the entire tread before replacing the
tire
WARNING
To reduce the risk of DEATH or SERIOUS INJURY:
Replace tires that are worn, show uneven wear, or are damaged...
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position...
Categories

1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more