Hyundai Santa Fe: Warning and indicator lights / Icy road warning light. Electronic Stability Control (ESC) indicator light
Icy road warning light
This warning light is to warn the driver the road may be icy.
When the temperature on the outside temperature gauge is approximately below
4°C (40°F), the Icy Road warning light and Outside Temperature Gauge blinks and
then illuminates. Also, the warning chime sounds 1 time.
You can activate or deactivate Icy Road Warning function from the User Settings
menu in the cluster LCD display. Select:
- Setup - User Settings - Cluster - Icy Road Warning
Information
If the Icy Road warning light appears while driving, you should drive more
attentively and safely refraining from over-speeding, rapid acceleration, sudden
braking or sharp turning, etc.
Electronic Stability Control (ESC) indicator light
This indicator light illuminates:
- When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The Electronic Stability Control indicator light illuminates for about 3 seconds
and then goes off.
- Whenever there is a malfunction with ESC system.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
This indicator light blinks:
While ESC is operating.
Electronic Stability Control (ESC) OFF indicator light
This indicator light illuminates:
- When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The ESC OFF indicator light illuminates for approximately 3 seconds and then
goes off.
- When you deactivate ESC system by pressing the ESC OFF button.
4 Wheel Drive (4WD) LOCK Indicator Light
This indicator light illuminates:
Once you set the ignition switch or Engine Start/Stop Button to the
ON position...
Immobilizer Indicator Light (without smart key)
This indicator light illuminates:
When the vehicle detects the immobilizer in the key with the ignition
switch in the ON position...
Other information:
Removal
•
Be careful not to damage the parts located under the vehicle
(floor under cover, canister, fuel tank) when raising the vehicle
using the lift...
Removal
1.
Turn the ignition switch OFF and disconnect the battery (-) terminal.
2.
Remove the heater & A/C control unit.
(Refer to Heating, Ventilation and Air Conditioning - "Heater & A/C
Control Unit")
3...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more