Hyundai Santa Fe: Warning and indicator lights / High Beam Assist indicator light. Cruise Indicator Light
High Beam Assist indicator light
.png)
This indicator light illuminates:
When the high-beam is on with the light switch in the AUTO position.
- White: When High Beam Assist is ready to operate.
- Green: When High Beam Assist is operating.
If your vehicle detects oncoming or preceding vehicles, High Beam Assist will
switch the high beam to low beam automatically.
Cruise Indicator Light
.png)
This indicator light illuminates:
When the cruise control system is enabled.
Turn signal indicator light
This indicator light blinks:
When you operate the turn signal indicator stalk.
If any of the following occur, there may be a malfunction with the turn signal
system...
SPORT Mode Indicator Light
This indicator light illuminates
When you select "SPORT" mode as drive mode.
SMART Mode Indicator Light
This indicator light illuminates:
When you select ''SMART" mode as drive mode...
Other information:
Auto Hold maintains the vehicle in a standstill even though the brake pedal is
not depressed after the driver brings the vehicle to a complete stop by depressing
the brake pedal.
To apply:
1. With the driver’s door, engine hood and liftgate (vehicle equipped with shift
button) closed, then press the AUTO HOLD switch...
Downhill Brake Control assists the driver to descend down a steep hill without
having to depress the brake pedal.
The system automatically applies the brakes to maintain vehicle speed below a
certain speed and allows the driver to concentrate on steering the vehicle down
hill...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more